| |
1. Authored and/or Edited Books or Chapters: 11
1. Lu, S. C-Y., and R. Komanduri, Knowledge-Based Expert
Systems for Manufacturing, ASME Publication No. H00371,
New York, NY, 388, Dec. 1986 (Original Editions.)
2. Lu, S. C-Y., "Knowledge-Based Expert Systems for
Materials Processing", Chapter 12 in Computer Modeling
for Polymer Processing: Fundamentals (C. L. Tucker, III,
Editor) pp. 555-573, Hanser Publishers Company, Munich,
Vienna, and New York, 1989.
3. Chao, N. H., S. C-Y. Lu, Concurrent Product and Process
Design, ASME Publication No. PED-Vol. 36 (DE-Vol. 21),
New York, NY, Dec. 1989 (Original Editions).
4. Lu, S. C-Y., "Artificial Intelligence Techniques
for Advanced Engineering Automation," A graduate-level
textbook, the World Scientific Publishing Company, 1990.
5. Wilhelm, R., S. C-Y. Lu, "Computer Methods for
Tolerance Design", the World Scientific International
Publishing Company, 1992.
6. Zhang, G., S. C-Y. Lu, "An Expert System Approach
for Economic Evaluation of Machining Operation Planning," Artificial
Intelligence in Operational Research, The MacMillan PTRDD
Ltd., 1992, pp. 165-178.
7. Lu, S. C-Y., "Knowledge Processing Technology for
Concurrent Engineering," Volume II of Advances in
Computer Integrated Manufacturing, pp. 195-231, JAI Press,
Ltd., 1993.
8. Whitehall, B., S. C-Y. Lu, "Theory Completion Using
Knowledge-based Learning," Chapter 6 in Machine Learning:
A Multi-strategy Approach, Vol. IV, pp. 165-187, Morgan
Kaufmann Publishers, 1994.
9. Jin, Y. and S. C-Y. Lu (Editors), “Multimedia
Technology for Collaborative Design and Manufacturing,” University
of Southern California, October 1997.
10. Jin, Y. and S. Lu "Toward a Better Understanding
of Engineering Design Models", Chapter 3 in Universal
Design Theory, H. Grabowski, S. Rude, G. Grein (Editors.),
pp.71-86, Shaker Verlag, Aachen, Germany, 1998.
11. Lu, S. C-Y., “Engineering as Collaborative Negotiation”,
an introduction to engineering textbook, Addison Wisely
Publishing Company, to be published in Fall 2003.
2. Archive Technical Journal Papers: 72
1. Lu, S. C-Y., "Cruising Speed of the M-113 Armed
Personnel Carriers," Journal of Ordnance Technology,
Vol. 32, No. 4, pp. 38-52, 1980.
2. Appleby, E. J., S. C-Y. Lu, R. S. Rao, M. L. Devenpeck,
P. K. Wright, and O. Richmond, "Strip Drawing: A Theoretical-Experimental
Comparison," The International Journal of Mechanical
Science, Vol. 26, No. 5, pp. 351-362, 1984.
3. Rao, R. S., M. L. Devenpeck, P. K. Wright, E. J. Appleby,
S. C-Y. Lu, and O. Richmond, "New Strip Drawing Experiments
Using Transparent Sapphire Dies," The International
Journal of Mechanical Science, Vol. 27, No. 11, pp. 725-740,
1985.
4. Lu, S. C-Y., "A Consultative Expert System for
Finite Element Modeling of Strip Drawing," Transactions
of the North American Manufacturing Research Institute
of SME, pp. 433-441, 1985.
5. Lu, S. C-Y., and P, K. Wright, "Finite Element
Modeling of Plane-Strain Strip Drawing with Interface Friction," The
Journal of Engineering for Industry, Transactions of American
Society of Mechanical Engineers, Vol. 110, No. 2, pp. 101-110,
1987.
6. Lu, S. C-Y., "Knowledge Map: An Approach to Knowledge
Acquisition in Developing Engineering Expert Systems",
Engineering with Computers, The International Journal for
Computer-Aided Mechanical and Structure Engineering, Vol.
3, pp. 59-68, 1987.
7. Lu, S. C-Y., "Decision Level Automation for Engineering
Design," Agricultural Engineering Magazine, Vol. 68,
No. 7, pp. 10-22, 1987.
8. Lu, S. C-Y., "An Intelligent Framework for Engineering
Decision Making," SAE Transactions, Vol. 96, No. 2,
pp. 738-747, 1987.
9. Mayer, A. K., and S. C-Y. Lu, "An AI-Based Approach
for the Integration of Multiple Sources of Knowledge to
Aid Engineering Design," Journal of Mechanisms, Transmissions,
and Automation in Design, Transactions of American Society
of Mechanical Engineers, Vol. 110, No. 3, pp. 316-323,
1988.
10. Lu, S. C-Y., and K. Chen, "A Machine Learning
Approach to the Automatic Synthesis of Mechanistic Knowledge
for Engineering Decision Making," Journal of Artificial
Intelligence for Engineering Design, Analysis, and Manufacturing,
Vol. 1, No. 4, pp. 109-118, 1988.
11. Subramanyam, S., and S. C-Y. Lu, "An Integrated
AI/OR Approach to Operation Planning Using Process Performance
Models," Transactions of the XVI North American Manufacturing
Research Institute of SME, pp. 388-394, 1988.
12. Ham, I., and S. C-Y. Lu, "Computer-Aided Process
Planning: The Present and the Future," keynote paper
to 1988 CIRP General Assembly, University of Tokyo, Tokyo,
Japan, Annuals of the CIRP, Vol. 37, No.2, pp. 591-601,
1988.
13. Chung, S. G., S. C-Y. Lu, and O. Richmond, "Explicit
Streamline Method for Steady Flows of Non-Newtonian Matter," Physical
Review A, Vol. 39, No. 5, pp. 2728-2730, 1988.
14. Subramanyam, S., S. C-Y. Lu, and W. J. Zdeblick, "A
Characterization of the Process Planning Task from an Artificial
Intelligence Perspective," Manufacturing Systems,
Vol. 17, No. 4, pp. 36-58, 1988.
15. Lu, S. C-Y., and G. M. Zhang, "An Integrated Framework
for the Optimization of Machining Operation Planning," Transactions
of the North American Manufacturing Research Institute
of SME, pp. 245-253, 1989.
16. Herman, A. E., and S. C-Y. Lu, "A New Modeling
Environment for Developing Computer-Based Intelligent Associates
with an Application in Machining Operation Planning," Transactions
of the North American Manufacturing Research Institute
of SME, pp. 260-265, 1989.
17. Lu, S. C-Y., "Machine Learning Techniques for
Group Technology Applications," Annuals of the CIRP,
Vol. 38, No. 2, pp. 455-459, 1989.
18. Tortorelli, D. A., R. B. Haber, and S. C-Y. Lu, "Design
Sensitivities Analysis for Nonlinear Transient Thermal
Systems," Journal of Computer Methods in Applied Mechanics
and Engineering, Vol. 77, pp. 61-78, 1989.
19. Tortorelli, D. A., R. B. Haber, and S. C-Y. Lu, "Design
Sensitivity Analysis for Elastodynamics Systems," Journal
of Structural Mechanics, Vol. 18, No. 1, pp. 77-106, 1990.
20. Klein, M., and S. C-Y. Lu, "Conflict Resolution
in Cooperative Design" Journal of Artificial Intelligence
in Engineering, Vol. 4, No. 4, pp. 168-180, 1990.
21. Lu, S. C-Y., and G. M. Zhang, "A Combined Inductive
Learning and Experimental Design Approach to Manufacturing
Operation Planning," Journal of Manufacturing. Systems,
Vol. 9, No. 2, pp. 103-115, 1990.
22. Zhang, G. M., and S. C-Y. Lu, "An Expert System
Framework for Economic Evaluation of Machining Operation
Planning," Journal of The Operational Research Society,
Vol. 41, No. 5, pp. 391-404, 1990.
23. Wilhelm, R. G., and S. C-Y. Lu, "Tolerance Primitives
for Composition and Synthesis," Transactions of the
North American Manufacturing Research Institute of SME,
pp. 366-370, 1990.
24. Tortorelli, D. A., G. Subramanyam, R. B. Haber, and
S. C-Y Lu, "Design Sensitivities Analysis for Coupled
Thermoelastic Systems," International Journal of Solids
and Structures, Vol. 27, No. 12, pp. 1477-1497, 1990.
25. Zhang, G. M., S. Yerramareddy, S. M. Lee, and S. C-Y.
Lu, "Simulation of Intermittent Turning Processes," Journal
of Dynamics Systems, Measurements, and Control, Vol. 113,
No. 3, pp. 458-466, 1990.
26. Whitehall, B., S. C-Y. Lu, and R. E. Stepp, "CAQ:
A Machine Learning Tool for Engineering," Journal
of Artificial Intelligence in Engineering, Vol. 5, No.
4, pp. 189-198, 1990
27. Lu, S. C-Y., "Machine Learning Approaches to Knowledge
Synthesis and Integration Tasks for Advanced Engineering
Automation," International J. of Computers in Industry,
Vol. 15, No. 1, pp. 105-120, 1990.
28. Lu, S. C-Y., "Knowledge Processing Technology
for Simultaneous Engineering," CIM Management, Vol.
6/90, pp. 17-30, 1990.
29. Lu, S. C-Y., "Knowledge Processing for Concurrent
Engineering: An Evolving Challenge in CIM Research," Robotics & Computer-Integrated
Manufacturing, Vol. 7, No. 3/4, pp. 263-277, 1990.
30. Lu, S. C-Y., and D. K. Tcheng, "Building Layered
Models to Support Engineering Decision Making: A Machine
Learning Approach," Journal of Engineering for Industry,
ASME Transactions, Vol. 113, No. 1, pp. 1-9, 1991.
31. Tortorelli, D. A., R. B. Haber, and S. C-Y. Lu, "Adjoint
Sensitivity Analysis for Nonlinear Dynamic Thermoelastic
Systems," Journal of AIAA, Vol. 29, No. 2, pp. 253-263,
1991.
32. Subramanyam, S., and S. C-Y. Lu, "The Impact of
an AI-Based Design Environment for Simultaneous Engineering
on Process Planning," International. Journal of Computer
Integrated Manufacturing, Vol. 4, No. 2, pp. 71-82, 1991
33. Zhang, G. M., S. Yerramareddy, S. M. Lee, and S. C-Y.
Lu, "Simulation of Surface Topography Formed during
the Intermittent Turning Processes," Journal of Dynamics
Systems, Measurements, and Control, Vol. 114, No. 2, pp.
273-279, 1991.
34. Subramanyam, S., and S. C-Y. Lu, "Computer-Aided
Simultaneous Engineering for Components Manufactured in
Small and Medium Lot-Sizes," Journal of Engineering
for Industry, ASME Transactions, Vol. 113, No. 4, pp 450-464,
1991.
35. Lu, S. C-Y., and S. Sundararajan, "A Cooperative
Distributed Problem Solving Framework," International
Journal of Applied Artificial Intelligence in Engineering,
Vol. 46, No.6, pp.114-128, 1991.
36. Lu, S. C-Y., and R. Wilhelm, "Automating Tolerance
Synthesis: A Framework and Tools," Journal of Manufacturing
Systems, SME, Vol. 10, No. 4, pp. 279-296, 1991.
37. Lu, S. C-Y., "Automatic Acquisition of Domain
Knowledge from Mechanistic Simulations for Building Engineering
Expert Systems," Engineering with Computers, An International
Journal for Computer-Aided Mechanical and Structural Engineering,
Vol. 4, No. 3, pp 26-44, 1991.
38. Lu, S. C-Y., D. K. Tcheng, and S. Yerramareddy, "Integration
of Simulation, Learning, and Optimization to Support Engineering
Design," Annals of the CIRP, Vol. 40, No.1, pp. 143
146, 1991.
39. Wilhelm, R. G., and S. C-Y. Lu, "Tolerances and
Function in Concurrent Product and Process Design," Transactions
of the North American Manufacturing Research Institution
of SME, pp. 357-363, 1991.
40. Domazet, D. S., and S. C-Y. Lu, "Feature-Based
Design with Multiple Product Model Representations," International.
Journal of Research in Engineering Design, Vol. 7, No.
2, pp. 122-146, 1991.
41. Domazet, D. S., and S. C-Y. Lu, "XROT: A Knowledge-Based
Expert System for Process Planning of Rotational Parts," Manufacturing
Review, ASME, Vol. 43, No. 4, pp. 36-52, 1991.
42. Domazet, D. S., and S. C-Y. Lu, "Concurrent Design
and Process Planning of Rotational Parts," International
Journal of Design and Manufacturing, Vol. 3, No. 4, pp.
27-43, 1991.
43. Whitehall, B. L., and S. C-Y. Lu, "Machine Learning
in Engineering Automation: The Present and the Future," Computers
in Industry, Vol. 17, No.2/3, pp. 91-100, 1991.
44. Klein, M., and S. C-Y. Lu, "Detecting and Resolving
Conflicts Among Cooperative Human and Machine-Based Design
Agents," International Journal for Artificial Intelligence
in Engineering, Vol. 7, No. 2, pp. 93-104, 1992.
45. Lu, S. C-Y., A. Herman, and K. Arnold, "TOPS:
An Intelligent Associate for Turning Operation Planning," Journal
of Applied Artificial Intelligence: Special Issue on AI
in Manufacturing, S. Kumara, S. Ohsuga, and I. Ham, eds.,
Vol. 6, pp.331-352, 1992.
46. Yerramareddy, S., D. K. Tcheng, S. C-Y. Lu, and D.
N. Assanis "Creating and Using Models for Engineering
Design, a Machine Learning Approach," IEEE Expert,
Special Track on Applications of Machine Learning, Vol.
7, No. 3, pp. 52-59, 1992.
47. Wilhelm, R. G., and S. C-Y. Lu, "Tolerance Synthesis
to Support Concurrent Engineering," Annals of the
CIRP, Vol. 41, No. 1, pp. 197-200, 1992.
48. Schwarz, S. A., and S. C-Y. Lu, "Representation,
Acquisition, and Manipulation of Probabilistic Attribute
Values to Support Engineering Decision Making," Transactions
of NAMRI/SME, Vol. XX, pp. 261-267, 1992.
49. Domazet, D., S. C-Y. Lu, and M. Kalajdzic, "Concurrent
Design and Process Planning of Rotational Parts," Annals
of the CIRP, Vol. 41, No. 1, pp. 181-184, 1992.
50. Herman, A. E., M. Lawley, S. C-Y. Lu and D. Mattox, "An
Opportunistic Approach to Process Planning Within a Concurrent
Engineering Environment," Annals of the CIRP, Vol.
42, No. 1, pp. 545-548, 1993.
51. Rao, R. Bharat and S. C-Y. Lu, "KEDS: A Knowledge-based
Equation Discovery System for Learning in Engineering Domains," IEEE
Expert, Vol. 47, No. 2, pp. 67-84, 1993.
52. Krause, F. L., F. Kimura, T. Kjellberg, and S. C-Y.
Lu, "Product Modelling," keynote paper to 43rd
CIRP General Assembly, Edinburgh, Scotland, U.K., Annals
of the CIRP, Vol. 42, No. 2, pp. 695-705, 1993.
53. Yerramareddy, S., S. C-Y. Lu, and K. Arnold, "Developing
Empirical Models from Observational Data using Artificial
Neural Networks, Journal of Intelligent Manufacturing,
Vol. 4, No. 1, pp. 72-94, 1994.
54. Lu, S. C-Y., K. Smith, A. Herman, D. Mattox, M. Silliman,
M. Lucenti, J. Jacobs, D. Chazin, M. Lawley, M. Case, "SWIFT:
System Workbench for Integrating and Facilitating Teams," International
Journal of Intelligent and Cooperative Information Systems,
Vol. 3, No. 2, pp. 74-98, 1994.
55. Yerramareddy, S., S. C-Y. Lu, and K. Arnold, "Developing
Empirical Models from Observational Data using Artificial
Neural Networks, Journal of Intelligent Manufacturing,
Vol. 4, No. 1, pp. 104-128, 1995.
56. Reddy, S., S. C-Y. Lu, "An Interactive Refinement
Methodology for Early Stage Exploration of Design Space
during System Design," Annals of the CIRP, Vol. 43,
No.1, pp. 115-120, 1995.
57. Domazet, D.S., F.N. Choong, D. Sng, N.C. Ho, and S.
C-Y. Lu, “Active Data Driven Design Using Dynamic
Product Models,” Annals of the CIRP, Vol. 44, No.
1, pp. 109-112, 1995.
58. Mattox, D., and S. C-Y. Lu, "Managing Causal Dependencies
in an Active Objct-Oriented Database," Journal of
Intelligent Information Systems, Vol. 11, No. 4, pp. 23-47,
1995.
59. Case, M. P., and S. C-Y. Lu, "A Discourse Model
for Collaborative Design," Journal of Computer-Aided
Design, Special Issue on "Computer-Aided Concurrent
Design”, Vol. 14, No. 4, pp. 16-32, 1995.
60. Li, D., S. C-Y. Lu, J. Cheng, and C. L. Wu, “ A
Model Fusion Approach to Support Negotiations During Complex
Engineering System Design,” Annals of the CIRP, Vol.
46, No. 1, pp. 89-92, 1997.
61. Jin, Y., and S. C-Y. Lu, “An Agent Supported
Approach to Collaborative Design,” Annals of the
CIRP, Vol. 47, No. 1, pp. 107-110, 1998.
62. Lu, S. C-Y., M. Shpitalni, R. Bar-Or, and R. Gadh, “Virtual
and Augmented Reality Technologies for Product Realization,” STC-Dn
Keynote Paper, Annuals of the CIRP, Vol. 48, No. 2, pp.
471-495, 1999.
63. Lu, Stephen C.-Y., Cai, J., Burkett, W., Udwadia,
F, “A
Methodology for Collaborative Design Process and Conflict
Analysis”, Annals of the CIRP, Vol 49, No. 1, pp.
69-73, 2000.
64. Lu, Stephen C-Y., Cai, J., “STARS: A Socio-Technical
Framework for Integrating Design Knowledge over the Internet”,
A Special Issue in IEEE Internet Computing, Vol. 4, No.
5, pp. 54-62, 2000.
65. Ge, Ping, Lu, Stephen C.-Y. and Wang, Nanxin, “A
Backward Mapping Approach for Complex System Design”,
The International Journal of Manufacturing Science and
Production, Vol. 3, No. 4, pp. 49-53, 2001.
66. Lu, S. C-Y., Cai, J., A Collaborative Design Process
Model in the Socio-technical Engineering Design Framework,
Journal of Artificial Intelligence in Engineering Design,
Analysis and Manufacturing, Vol. 15, pp. 3-20, 2001.
67. Ge, Ping, Lu, S. C.-Y. and Suh, N. P., "An Axiomatic
Approach for Target Cascading of Parametric Design of Engineering
Systems", Annals of the CIRP, Vol. 51/1/2002, pp.
111-114, 2002
68. Ge, Ping, Lu, S. C.-Y. and Bukkapatnam, S. TS., "A
Direct Synthesis Method for Early-Stage Parametric Design
of Large-scale Mechanical Systems", accepted for publication,
Journal of Mechanical Design, ASME Transaction, 2002.
69. Ge, Ping, Lu, S. C.-Y. and Bukkapatnam, S. TS, "Study
of An Axiomatic Approach for Parametric Design of Mechanical
Systems”, accepted for publication, Journal of Mechanical
Design, ASME Transaction, 2002.
70. Ge, P., Wang, N., and Lu, S. C.-Y., "An Evolutionary
Meta-Modeling Approach in Automotive Bumper System Design
and Analysis", accepted for publication, Journal of
Computer and Information Science in Engineering (JCISE),
the ASME Transaction, 2002.
71. Burkett, W., Lu, S.,C-Y., “Integration of Perspective-Based
Engineering Data on the Internet”, accepted for publication,
Journal of Engineering with Computers, 2002.
72. Cai, J., Lu, S. C-Y., Grobler, F., Case M., Jing,
N., “Modeling
and Managing Collaborative Processes over the Internet”,
accepted for publication, Journal of Business Process Management,
2002.
3. Archive Technical Journal Papers (under reviews):
3
1. Udwadia,
F. S., Lu S. C-Y., Griffith E., Case M., “A
Socio-Technical Framework for Collaborative Engineering
Design”, submitted for reviews, Journal of Engineering
Design Research, 2002.
2. Lu, Stephen C.-Y., Cai, J., “A Generic Collaborative
Engineering Design Process Model for Conflict Management”,
submitted for reviews, Journal of Mechanical Design, the
ASME Transaction, 2002.
3. Lu, S. C-Y. and Jing, N., “Conflict Management
in Collaborative Design”, submitted for reviews,
International Journal of Manufacturing Sciences and Production,
2002
4. Reviewed and Referenced Conference Papers: 98
1. Rao, R. S.,
P. K. Wright, and S. C-Y. Lu, "Frictional
Interactions in Forming Processes: New Studies with Transparent
Sapphire Strip-Drawing Dies," Proc. of the Conf. on
Applications of Physics in the Steel Industry, Bethlehem,
PA, Vol. 84, pp. 286-296, Oct. 1981.
2. Rao, R. S. , S. C-Y. Lu, and P. K. Wright, "Observations
of Die-Workpiece Interface Through Transparent Sapphire
Dies," Proc. of the TMS-AIME Fall Meeting, St. Louis,
MO, pp. 65-78, Oct. 1982.
3. Lu, S. C-Y., E. J. Appleby, R. S. Rao, M. L. Devenpeck,
P. K. Wright, and O. Richmond, "A Numerical Solution
of Strip Drawing Employing Measured Boundary Conditions
Obtained with Transparent Sapphire Dies," Proc. of
the Int'l. Conf. on Numerical Methods in Industrial Forming
Processing, Swansea, England, pp. 735-746, July 1982.
4. Lu, S. C-Y., "Applications of Knowledge-Based Expert
Systems in Automated Manufacturing," Proc. of the
American Society of Mechanical Engineers International
Computers in Engineering Conf., Boston, MA, Vol. 1, pp.
425-431, Aug. 1985.
5. Lu, S. C-Y., C. R. Blattner, and T. J. Lindem, "A
Knowledge-Based Expert System for Drilling Station Design," Proc.
of the Int'l. Conf. on Applications of Artificial Intelligence
to Engineering Problems, Southampton, England, Vol. 1,
pp. 423-443, April 1986.
6. Lu, S. C-Y., C. R. Blattner, and T. J. Lindem, "Developing
an Intelligent System to Aid in Engineering Design: Issues
of Knowledge Acquisition," Proc. of the ASME International
Computers in Engineering Conf., Chicago, IL, Vol. 1, pp.
213-220, July 1986.
7. Lu, S. C-Y., "Expert Systems and Supercomputers
as Intelligent Tools for Engineering Decision Making," Proc.
of the Int'l. Conf. of Supercomputer Applications in the
Automotive Industry, Zurich, Switzerland, pp. 431-452,
Oct. 1986.
8. Lu, S. C-Y., "Knowledge-Based Expert Systems: A
New Horizon for Manufacturing Automation," Proc. of
the American Society of Mechanical Engineers Symposium
on Knowledge-Based Expert Systems for Manufacturing, Anaheim,
CA, pp. 11-24, Dec. 1986.
9. Lu, S. C-Y., "An Intelligent Framework for Engineering
Decision Making," Proc. of the Society of Automotive
Engineers, Technical Paper Series 870562, Detroit, MI,
pp. 15-24, February 1987.
10. Subramanyam, S., S. C-Y. Lu, and W. J. Zdeblick, "A
Characterization of the Process Planning Task from An Artificial
Intelligence Perspective," Proc. of the 19th CIRP
Int'l. Seminar on Manufacturing Systems, University Park,
PA, pp. 197-206, June 1987.
11. Gustafson, B. K. and S. C-Y. Lu, "Fundamental
Issues in Applying Artificial Intelligence to Industrial
Automation: A Case Study of Automated Robot Task Programming," the
Proc. of the American Society of Mechanical Engineers Symposium
on Integrated and Intelligent Manufacturing, Boston, MA,
PED-Vol. 25, pp. 365-380, Dec. 1987.
12. Lu, S. C-Y., "Knowledge Processing for Engineering
Automation," Proc. of the 15th Conf. on Production
Research and Technology, Berkeley, CA, pp. 455-468, Jan.
1988.
13. Chen, K. and S. C-Y. Lu, "A Machine Learning Approach
to the Automatic Synthesis of Mechanistic Knowledge for
Engineering Decision Making," Proc. of the 4th Institute
of Electrical and Electronics Engineers Conf. on Artificial
Intelligence Applications, San Diego, CA, pp. 306-311,
March 1988.
14. Lu, S. C-Y., and J. B. Thompson, "A Distributed
Artificial Intelligence Approach to Integrated Engineering
Design," The 1st Int'l. Conf. on Industrial and Engineering
Applications of Artificial Intelligence and Expert Systems,
Tullahoma, TN, pp. 438-446, June 1988.
15. Klein, M., and S. C-Y. Lu, "Run-Time Conflict
Resolutions for Cooperative Design," Proc. of the
1988 AAAI Workshop on AI in Design, pp. 329-350, Aug. 1988.
16. Lu, S. C-Y., and G. M. Zhang, "The Roles of Artificial
Intelligence and Expert Systems in the Process Modeling
of Machining Operations," Proc. of the 4th Int'l.
Conf. on Computer-Aided Production Engineering, University
of Edinburgh, England, pp. 507-515, Nov. 1988.
17. Lu, S. C-Y., and S. Subramanyam, "A Computer-Based
Environment for Simultaneous Product and Process Design," Proc.
of the ASME Winter Annual Meeting, Symposium of Advances
on Manufacturing Systems, Chicago, IL, pp. 35-46, Dec.
1988.
18. Bruce, R. W., M. E. Karabin, S. Panchanadeeswaran,
L. A. Lalli, O. Richmond, M. L. Devenpeck, S. C-Y. Lu,
and T. Sheppard, "Experimental and Analytical Comparison
of Interface and Internal Variables in Cold Rolling," ASME
Winter Annual Meeting, Symposium on Materials in Manufacturing
Processes, Chicago, IL, pp. 49-57, Dec. 1988.
19. Baskin, A. B., S. C-Y. Lu, R. E. Stepp, and M. Klein, "Integrated
Design as a Cooperative Problem Solving Activity," 22nd
Hawaii Int'l. Conf. on System Sciences, pp. 387-396, Jan.
1989.
20. Tortorelli, D. A., R. B. Haber, and S. C-Y. Lu, "Shape
Sensitivities for Nonlinear Dynamic Thermoelastic Systems," AIAA/ASME/ASCE/AHS/ASC
30th Structures, Structural Mechanics and Materials Conf.,
Mobile, AL, pp. 1321-1329, April 3-5, 1989.
21. Lu, S. C-Y., "Artificial Intelligence Approaches
to Engineering Automation," Proc. of the NSF/PYI University/Industry
Symposium, Yorktown Heights, NY, April 24-26, 1989.
22. Lu, S. C-Y., S. Subramanyam, J. B. Thompson, and M.
Klein," A Cooperative Product Development Environment
to Realize the Simultaneous Engineering Concept," Proc.
of the ASME International Computers in Engrg. Conf., Anaheim,
CA, Vol. 1, pp. 9-18, July 30-Aug. 3, 1989.
23. Tcheng, D. K., B. L. Lambert, and S. C-Y. Lu, "Building
Robust Learning Systems by Combining Induction and Optimization," Proc.
of the 11th Int'l. Joint Conf. on Artificial Intelligence,
Vol. 1, pp. 806-812, 1989.
24. Tcheng, D. K., B. L. Lambert, S. C-Y. Lu, and L.
Rendell, "Generalized
Recursive Splitting Algorithms for Learning Hybrid Concepts," Proc.
of the 6th Int'l. Workshop on Machine Learning, Cornell
University, Ithaca, NY, pp. 496-498, June 29-July 1, 1989.
25. Lu, S. C-Y., "Machine Learning Approaches to the
Knowledge Synthesis and Integration Tasks for Advanced
Manufacturing Automation," Proc. of the 3rd Int'l.
Workshop on Intelligent Manufacturing Systems, Dubrovnik,
Yugoslavia, Aug. 26-Sept. 2, 1989.
26. Ham, I., and S. C-Y. Lu, "New Developments of
CAPP in USA and Japan," presented to the CIRP Special
Topics Workshop on CAPP, Hannover, FRG, 1-24, Sept. 21-22,
1989.
27. Klein, M., S. C-Y. Lu, and A. B. Baskin, "Towards
a Theory of Conflict Resolution in Cooperative Design," Proc.
of the Ninth Workshop on Distributed Artificial Intelligence,
Eastsound, WA, pp. 329-350, Sept. 1989.
28. Lu, S. C-Y., "Artificial Intelligence in Manufacturing:
The Next Frontier of Production Automation," Proc.
of the 1989 ORSA/TIMS Meeting, New York, NY, Oct. 16-18,
1989.
29. Subramanyam, S., and S. C-Y. Lu, "Computer-Aided
Simultaneous Engineering for Components Manufactured in
Small Medium Lot-Sizes," Proc. of the Symposium on
Concurrent Product and Process Design, pp. 175-184, ASME
Winter Annual Meeting, 1989.
30. Thompson, J. B., and S. C-Y. Lu, "Representing
and Using Design Rationale in Concurrent Product and Process
Design," Proc. of the Symposium on Concurrent Product
and Process Design, ASME Winter Annual Meeting, pp. 109-115,
1989.
31. Zhang, G. M., S. Yerramareddy, S. M. Lee, and S. C-Y.
Lu, "Simulation of Intermittent Turning Processes," Proc.
of the ASME Winter Annual Meeting, Symposium on Control
Issues in Manufacturing Processes, pp. 1-9, San Francisco,
CA, 1989.
32. Zhang, G. M., S. Yerramareddy, S. M. Lee, and S. C-Y.
Lu, "Simulation of Surface Topography Formed during
the Intermittent Turning Processes," Proc. of the
ASME Symposium on Control Issues in Manufacturing Processes,
Winter Annual Meeting, pp. 11-18, San Francisco, CA, 1989.
33. Lu, S. C-Y., "Knowledge Processing for Concurrent
Engineering: An Evolving Challenge in
CIM Research," Proc. of the Yugoslav-American Workshop
in AI and Robotics in CIM, Belgrade, Yugoslavia, April
9-13, 1990.
34. Teng, H. S., K. Chen, and S. C-Y. Lu, "Adaptive
Real-time Anomaly Detection Using Inductively Generated
Sequential Patterns," Proc. of the 1990 IEEE Symposium
on Research in Security and Privacy, Oakland, CA, pp. 278-284,
1990.
35. Whitehall, B. L., R. E. Stepp, and S. C-Y. Lu, "Equation
Generation for Clustering," Proc. of the 3rd Int'l.
Conf. on Industrial and Engineering Applications of Artificial
Intelligence and Expert Systems, pp. 999-1004, 1990.
36. Whitehall, B. L., R. E. Stepp, and S. C-Y. Lu, "Knowledge-Based
Learning: Integrating Acquisition and Learning," Proc.
of the 3rd Int'l. Conf. on Industrial and Engineering Applications
of Artificial Intelligence and Expert Systems, pp. 932-941,
1990.
37. Lu, S. C-Y., "Multiple Cooperating Knowledge Sources
Paradigm for Concurrent Product and Process Design: A Step
Towards the Knowledge Processing Technology," Proc.
of the 2nd Int'l. Conf. on Advanced Manufacturing Systems
and Technology, Trento, Italy, 1, pp. 130-143, June 1990.
38. Lu, S. C-Y., "Concurrent Product and Process Design:
Conceptual Framework and Software
Implementation," Proc. of the Symposium on Advanced
Manufacturing, New Jersey Institute of Technology, Newark,
NJ, pp. 49-56, 1990.
39. Lu, S. C-Y., "A Basic Framework of the Knowledge
Processing Technology for Advanced
Engineering Automation," Proc. of the SIGMAN Workshop
on Intelligent Manufacturing Architecture, Boston, MA,
pp. 30-42, Aug. 1, 1990.
40. Teng, H. S., K. Chen, and S. C-Y. Lu, "Security
Audit Trail Analysis Using Inductively Generated Predictive
Rules," Proc. of the 6th IEEE Conf. on Artificial
Intelligence Applications, 2, pp. 91-97, 1990.
41. Ferreira, P., S. C-Y. Lu, and X-S. Zhu, "Conceptual
Model of Automated Process Planning for the Machined Parts
Domain," Proc. of the 22nd CIRP Int'l. Seminar on
Manufacturing Systems, The Netherlands, pp. 84-102, June
16-18, 1990.
42. Lu, S. C-Y., and S. Subramanyam, "A Design for
Manufacturability Advisory System for Machining Components
in Small to Medium Lot Sizes," Proc. of the IFIP W.G.
5.2 Workshop on Design for Manufacturing, Enschede, The
Netherlands, June 14-15, 1990.
43. Lu, S. C-Y., and R. G. Wilhelm, "Applying Constraint-Based
Reasoning to Geometric Tolerancing," Proc. of the
Int'l. Conf. in Artificial Intelligence in Engineering,
Vol. 1, pp. 37-54, Aug. 1990.
44. Case, M. P., I. McConkey, K. McGraw, and S. C-Y.
Lu, "Multiple
Cooperating Knowledge Sources for the Design of Building
Energy Systems," Proc. of the Annual Meeting of the
ASHRAE, pp. 223-254, Aug. 1990.
45. Garrett, J. H. Jr., S. C-Y. Lu, J. B. Thompson, and
A. E. Herman, "Applications of Artificial Intelligence
Techniques to Engineering Design at the University of Illinois
at Urbana-Champaign," Proc. of the Int'l. Conf. in
Artificial Intelligence in Engineering, Vol. 1, pp. 261-280,
Aug. 1990.
46. Thompson, J. B., and S. C-Y. Lu, "Design Evolution
Management: A Methodology for Representing and Utilizing
Design Rationale," Proc. of the 2nd Int'l. ASME Conf.
on Design Theory and Methodology, Chicago, IL, pp. 185-191,
Sept. 1990.
47. Lu, S. C-Y., "Knowledge Processing Technology
for Concurrent Engineering Task," CIE/USA
METS'90 Conf., Taipei, Taiwan, pp. 107-145, Dec. 1990.
48. Whitehall, B. L., S. C-Y. Lu, and R. E. Stepp, "Theory
Completion using Knowledge-Based Learning," Proc.
of the First International Workshop on Multistrategy Learning,
Edited by R. S. Michalski and G. Tecucci. Harpers Ferry,
West Virginia. pp 144-159, Nov. 7-9, 1991.
49. Whitehall, B. L., and S. C-Y. Lu, "Machine Learning
in Engineering Automation: The Present and the Future," Proc.
of the CIRP Workshop of the Intelligent Manufacturing Systems
Seminars on Learning in IMS, Budapest, Hungary, pp. 349-366,
March 6-8, 1991.
50. Chien, S. A., B. L. Whitehall, S. C-Y. Lu, T. Dietterich,
R. Doyle, B. Falkenhainer, and J. Garrett, "Machine
Learning in Engineering Automation," Proc. of the
Eighth International Workshop on Machine Learning, pp.
577-580, 1991.
51. Wilhelm, R. G. and S. C-Y. Lu, "Tolerances and
Function in Concurrent Product and Process Design," presented
at the 1991 NAMRC XIX Meeting, pp. 357-363, May 21 23,
1991.
52. Lu, S. C-Y., "Beyond Rule-Based Expert Systems:
Current Research Activities of Artificial Intelligence
in Engineering in the United States," presented at
the German Association of Engineers (VDI) Expert Systems
Design and Development Conference, Heidelberg, Germany,
pp. 33-90, Oct. 7-8, 1991.
53. Whitehall, B. L. and S. C-Y. Lu, "A Study of How
Domain Knowledge Improves Knowledge-Based Learning Systems," Proc.
of the Eighth International Workshop on Machine Learning,
pp. 559-563, 1991.
54. Rao, R. B., S. C-Y. Lu, and R. E. Stepp, "Knowledge-Based
Equation Discovery for Engineering Domains," Proc.
of the Eighth International Workshop on Machine Learning,
pp. 630-634, 1991.
55. Tcheng, D. K., B. L. Lambert, S. C-Y. Lu, and L. A.
Rendell, "AIMS: An Adaptive Interactive Modeling System
for Supporting Engineering Decision Making," Proc.
of the Eighth International Workshop on Machine Learning,
pp. 645-649, 1991.
56. Lu, S. C-Y., "Integrated Knowledge, Geometry,
and Data Processing Technologies to Support Concurrent
Product Development Practice," Proc. of the ICCIM
'91 Conference, Singapore, pp. 181-184, 1991.
57. Klein, M., and S. C-Y. Lu, "Insights into Cooperative
Group Design: Experience with the LAN Designer System," Proc.
of the Sixth Int'l. Conference on Applications of Artificial
Intelligence in Engineering (AI '91), University of Oxford,
pp. 143-162, July 2-4, 1991.
58. Lu, S. C-Y., "Machine Learning and Its Applications," contribution
to the panel discussion on Machine Learning and Intelligent
Manufacturing Systems, World Congress on Expert Systems,
Orlando, FL, December 17, 1991.
59. Lu, S. C-Y., "Knowledge Processing Technology
for Concurrent Engineering Task," Proc. of the 1991
NSF Design and Mfg. Systems Conference, Austin, TX, pp.
533-542, Jan. 1-11, 1991.
60. Klein, M., and S. C-Y. Lu, "Insight into Cooperative
Group Design: Experience with the LAN Design System. In:
Trends in Artificial Intelligence (Proceedings of the 2nd
Congress of the Italian Association for Artificial Intelligence,
AI*IA, Palermo, Italy, October 1991). Ardizzone, E., Gaglio,
S. and Sorbello, E. Eds. Lecture Notes in Artificial Intelligence
549, Springer-Verlag, pp. 354-364, 1991.
61. Whitehall, B., L. B. Fulkerson, J. Hall, and S. C-Y.
Lu, "Using Machine Learning to Understand Manufacturing
Control Issues," Proc. of the Eighth IEEE Conference
for Artificial Intelligence Applications, pp. 192-196,
March 2-6, 1992.
62. Lu, S. C-Y., "Knowledge Processing Tools to Support
Concurrent Engineering Tasks," Proc. of the 1992 Design
and Manufacturing System Conference, Atlanta, Georgia,
pp. 373-379, Jan.1992,
63. Lu, S. C-Y., "Computer Tools for Concurrent Engineering:
Challenges, Requirements, and Solutions," Berlin Symposium
on International Trends in Manufacturing, Germany, pp.
373-379, 1992.
64. Schwarz, S.A., and S. C-Y. Lu, "Representation,
Acquisition, and Manipulation of Probabilistic Attribute
Values to Support Engineering Decision Making," presented
at NAMRC XX, Pullman, Washington, May 20 22, 1992.
65. Rao, R. B., and S. C-Y. Lu, "KEDS: A Knowledge-based
Equation Discovery System for Engineering Problems," chosen
for the Outstanding Paper Award, Eighth IEEE Conference
on Artificial Intelligence for Applications, Monterey,
CA, pp. 211-217, March 2-6, 1992.
66. Rao, R. B., and S. C-Y. Lu, "Learning Engineering
Models with the Minimum Description Length Principle," Tenth
National Conference on Artificial Intelligence, Menlo Park,
CA, pp.717-722, July 13-16, 1992.
67. Herman, A. E., and S. C-Y. Lu, "Computer Methods
for Distributed Reasoning to Support Concurrent Engineering," Proc.
of the Prolamat '92 Conference, Tokyo, Japan, pp 1-19,
June 24-26,1992.
68. Case, M., N. Contractor, P. M. Jones, S. C-Y. Lu, and
B. O'Keefe, "Team Engineering Analysis and Modeling:
Toward Normative Model of Team Interaction," Proc.
of the 1992 IEEE International Conference on Systems, Man,
and Cybernetics, Chicago, Vol. 2, pp. 1202-1207, October
1992.
69. Lu, S. C-Y., "Knowledge Processing Tools for Concurrent
Engineering Tasks," Proc. of the Second International
Conference on Automation Technology, Taiwan, pp. 1-10,
July 5-8, 1992.
70. Lu, S. C-Y., "Learn to Use Machine Learning in
Real-World Applications," Proc. of the 1992 National
Communications Forum, Chicago, Oct. 12-14, 1992.
71. Lu, S. C-Y., "Research, Development and Implementation
of Knowledge Processing Tools to Support Concurrent Engineering
Tasks," Proc. of the 19th Annual NSF Grantees Conference
on Design & Manufacturing Systems Research, Charlotte,
North Carolina, Jan. 6-8, 1993.
72. Yerramareddy, S., and S. C-Y. Lu, "Implementation
and Evaluation of a System for Interactive Parametric Design," NAMRC
XXI, Stillwater, Oklahoma, pp 413-419, May 19-21, 1993.
73. Rao, R. B., and S. C-Y. Lu, "Inverse Engineering:
A Methodology for Learning Synthesis Models to Support
Engineering Decision Making," Ninth IEEE Conference
on Artificial Intelligence for Applications, Orlando, Florida,
pp 205-211, March 1-5, 1993.
74. Rao, R. B., and S. C-Y. Lu, "Building Synthesis
Models to Support Early Stage Product and Process Design," Proc.
of the AAAI-93, The Eleventh National Conference on Artificial
Intelligence, pp 277-282 July 1993.
75. Rao, R. B., and S. C-Y. Lu, "Supporting Product
Design Activities with the Inverse Engineering Methodology," 25th
CIRP International Seminar on Manufacturing Systems, April
22-23, 1993.
76. Lu, S. C-Y., K. Smith, A. Herman, D. Mattox, M. Silliman,
M. Lucenti, J. Jacobs, D. Chazin, M. Lawley, M. Case, "SWIFT:
System Workbench for Integrating and Facilitating Teams," Proc.
of the 2nd IEEE Workshop on Enabling Technologies: Infrastructure
for Collaborative Enterprises (WET ICE), April 20-22, 1993.
77. Mattox, D., K. Smith, and S. C-Y. Lu, "Tracking
Causal Dependencies in an Active Object-Oriented Database," the
Third International Conference on Deductive and Object-Oriented
Databases, Phoenix, AZ, pp. 379-394, Dec. 6-8, 1993.
78. Reddy, S., and S. C-Y. Lu, “A Machine Learning
Methodology for Using Simulation Models to Support Parametric
Design,” Proceedings of the NSF Design and Manufacturing
Grantees Conference, Cambridge, MA, pp. 89-90, January
5-7, 1995.
79. Jones, P., N. Contractor, S. Lu, B. O'Keefe, "Intelligent
Collaborative Support for Engineering Design," Proceedings
of the Symposium on Human Factors in Design for Manufacturability,
12th Congress of the International Ergonomics Association,
Toronto, Canada, pp. 146-174, August 15-19, 1995.
80. Jones, P., N. Contractor, B. O'Keefe, S. Lu, "Competence
Models and Self-Organizing Systems: Toward Intelligent,
Evolvable, Collaborative Support," Proceedings of
the 1994 IEEE Systems, Man, and Cybernetics Conference,
San Antonio, TX, pp. 75-94, October 2-5, 1995.
81. Silliman, M. and S. C-Y. Lu, "Maintaining Consistent
Representations to Support Parametric Design and Concurrent
Engineering, Proceedings of the " Automation '95 Conference,
Taiwan, July 6-8, 1995.
82. Baskin, A. B., R. Ganeshan, M. Case, and S. C-Y.
Lu, “Interest
as a Non-deterministic Specification of Process for an
Agile Virtual Enterprise,” Proceedings of the Conference
on Agile and Intelligent Manufacturing Systems, Troy, NY,
October 10-14, 1996.
83. Yusas, S., S. C-Y. Lu, Ding, H. and A. B. Baskin, “ Virtual
Reality Applications to Support Product Modeling as a Collaborative
Negotiation.” Proceedings of the Annual Conference
on Industrial Engineering Applications, pp. 676-681, Houston,
TX, 1996.
84. Weiler, M., and S. C-Y. Lu, “Maximize Customer
Satisfaction in a Product Design Process by Using Engineering
as Collaborative Negotiation Paradigm and the Dynamic Negotiation
Model,” Proceedings of the CIRP International Design
Seminar on Multimedia Technology for Collaborative Design
and Manufacturing, pp. 29-36, Los Angeles, CA, 1997.
85. Coimbatore, V., C.Y. Wang, R. Ganeshan, A. B. Baskin,
and S. C-Y. Lu, “ CITYWORK: A Collaborative Maintenance
Management Application,” Proceedings of the CIRP
Design Seminar on Multimedia Technology for Collaborative
Design and Manufacturing, LA, CA, October 17-20, 1997.
86. Heckel, J., R. Ganeshan, M. Case, S. C-Y. Lu, and A.
B. Baskin, “ The Virtual Workspace System: An Enabling
Technology for Collaborative Engineering Applications,” Proceedings
of the Workshop on Enabling Technologies for Collaborative
Enterprise, Boston, MA, June 18-20, 1997.
87. Baskin, A.B., S. C-Y. Lu, R. Ganeshan, and M. Case, “Collaborative
Workspace: Sharing Emerging Product Models Across Disciplines,
Space and Time,” Proceedings of the Concurrent Engineering
Workshop, Trop, NY, October 1997.
88. Lu, S. C-Y., P. Ge, and N. Wang, “ Application
of An Evolutionary Modeling Approach to Automotive Bumper
System Design and Analysis,” Proceedings of the ASME
Design Engineering Technical Conference, DETC98/CIE-5548,
Atlanta, Georgia, USA, September 13-16, 1998.
89. Weiler, M., and S. C-Y. Lu, “ Using QFD in a
Dynamic Negotiation Model for Maximizing Customer Satisfaction,” Proceedings
of the 4th International Symposium on QFD, Sydney, Australia,
August 1998
90. Li, D., S. C-Y. Lu, S. Bukkapatnam, and J. Pien “Building
System Level Models for Spray Forming Process,” Proceedings
of the ACLOA Owen Richmond Symposium, Pittsburgh, PA, July,
1998.
91. Lu, S. C-Y., Ge, Ping, Bukkapatnam, S. TS. and Wang,
N., “A Backward Mapping Methodology for Design Synthesis” Proceedings
of the ASME Design Engineering Technical Conference, DETC99/DTM-8766,
Design Theory and Methodology Division, Las Vegas, Nevada,
September12-15, 1999.
92. Lu, S. C-Y., Cai, J., “Modeling Collaborative
Design Process with a Socio-Technical Framework”,
Proceedings of the 6th ISPE International Conference on
Concurrent Engineering, Bath, United Kingdom, 1999.
93. Wang, N. and Ge, Ping, and Lu, S. C-Y., “Study
of Meta-modeling Techniques and Their Applications in Engineering
Design”, Proceedings of IMECE99, Symposium on Decision
Making in Design and Manufacturing, November 14-19, 1999,
Nashville, Tennessee, USA, 1999.
94. Ge, P., Lu, S. C-Y., and Wang, N., “ A Backward
Mapping Approach for Complex System Design”, Proceedings
of the 2000 CIRP International Design Seminar, DN2000,
Haifa, Israel, May 16-18, 2000.
95. Ge, Ping, Lu, S. C-Y. and Wang, N., “DoE Study
in Building Surrogate Models for Complex Systems”,
Proceedings of 2000 ASME Design Engineering Technical Conferences,
DETC2000/CIE-14653, Computer and Information in Engineering
Design Division, September 10-13, Baltimore, Maryland,
USA, 2000.
96. Lu. S. C-Y., “Theory and Framework to Support
Collaborative Engineering over the Internet”, the
CIRP International Design Seminar, pp. 14-32, Royal Institute
of Technology, Stockholm, Sweden, June 6-9, 2001.
97. Lu, S. C-Y., “A Socio-Technical Framework for
Collaborative Design”, the CIRP International Design
Seminar, pp. 87-99, Hong Kong University of Science and
Technology, Hong Kong, May 16-18, 2002.
98. Ge, Ping, Lu, S. C.-Y. and Bukkapatnam, S. TS, "A
Direct Synthesis Method for Early-Stage Parametric Design
of Large-scale Mechanical Systems", Proceedings of
2002 ASME Design Engineering Technical Conferences, DETC/DTM-34006,
Sept. 28 - Oct. 2, Montreal, Canada, 2002.
5. Referenced Conference Papers (under reviews): 2
1. Ge, Ping,
Lu, S. C.-Y. and Bukkapatnam, S. TS, ""Study
of An Axiomatic Approach for Parametric Design of Mechanical
Systems", submitted to ASME/DETC 2003 Design Theory
and Methodology Division, Chicago, Illinois, 2003.
2. Lu, S. C-Y., Zhang, J. and Wang C-T., “Using a
Socio-Technical Framework to Support Collaborative Tele-Medicine
over the Internet”, submitted to ASME/DETC 2003 Design
Theory and Methodology Division, Chicago, Illinois, 2003.
6. Published Research Reports (partial list only): 37
1. Wright, P.
K., and S. C-Y. Lu, "Boundary Conditions
in Large Strain Steady-State Plastic Deformation Processes," Progress
and Final reports to National Science Foundation, Grant
No. 80-11582, 1981.
2. Lu, S. C-Y., and O. Richmond, "Natural Coordinate
System for Steady-State Plastic Deformation of History–Dependent
Solids," Technical Report No. ME-82-731, Department
of Mechanical Engineering, Carnegie-Mellon University,
1982.
3. Lu, S. C-Y., and P. K. Wright, "Forging Analysis
for GFM Flexible Manufacturing System," Technical
Report No. RI-83-236, The Robotics Institute, Carnegie-Mellon
University, 1983.
4. Lu, S. C-Y., and L. M. Chang, "A Computational
Method for Steady-State Metal Forming Processes," Progress
Report to the Alcoa Laboratories, 1985.
5. Lu, S. C-Y., T. P. Brand, and S. G. Kapoor, "Sensor
and Guidance Technology Related to Mobile Robot Devices," Final
Report to U.S. Army Construction Engineering Research Laboratory,
Oct. 1985.
6. Kapoor, S. G., S. C-Y. Lu, and S. Menon, "Development
of Landmark System for Automated Warehouse," Progress
Report to U.S. Army. CERL, Oct. 1985.
7. Sundararajan, S., and S. C-Y. Lu, "DEC-Tree," Technical
Report to Digital Equipment Corporation, Feb. 1988.
8. Sundararajan, S., and S. C-Y. Lu, "Cooperative
Distributed Problem Solving: An ISM Prototype," Technical
Report to Digital Equipment Corporation, Feb. 1988.
9. Lu, S. C-Y., J-C. Schraven, and R. Wilhelm, "Graphical
Simulation of an Automated Arc-Spray System," Final
Report submitted to Advanced Constr. Tech. Cntr., UIUC,
May 1988.
10. Lu, S. C-Y., F. Collier, J. Musfeldt, and R. Wilhelm, "Intelligent
Cooperation of Multiple Robotic Manipulators," Final
Report submitted to the Advanced Construction Technology
Center, UIUC, May 1988.
11. Lu, S. C-Y., and A. Herman, "Specification for
the Turning Operations Planning System (TOPS)," Technical
Report to Allied Signal, 1989.
12. Lu, S. C-Y., and R. G. Wilhelm, "Automating Tolerance
Synthesis: A Framework and Tools," Research Report
to Army Research Office, Aug. 1990.
13. Mattox, D., F. S.Shakikh, and S. C-Y. Lu, "Intelligent
Design System: A Conceptual Framework for Design," Technical
Research Report, Ford Motor Company, 1990.
14. Lu, S. C-Y., and R. G. Wilhelm, "Applying Constraint-Based
Reasoning to Geometric Tolerancing," Technical Research
Report, Document No. 90-44-06, Advanced Construction Technology
Center, UIUC, Sept. 1990.
15. Lu, S. C-Y., "Concurrent Engine Design and Manufacturing
Methodology," report on potentials for collaboration,
Ford Motor Company, Feb. 1991.
16. Rao, R. B., S. C-Y. Lu, and R. E. Stepp, "Knowledge-Based
Equation Discovery in Engineering Domains," Technical
Report No. KBESRL-ML-91-001.
17. Rao, R. B., and S. C-Y. Lu, "Learning Engineering
Models with the Minimum Description Length Principle," Technical
Report No. KESRL-ML-92-001.
18. Rao, R. B., and S. C-Y. Lu, "Inverse Engineering:
A Methodology for Learning Synthesis Models to Support
Engineering Decision-Making," Technical Report No.
KBESRL-ML-92-002.
19. Rao, R. B., and S. C-Y. Lu, "Building Synthesis
Models to Support Early Stage Product Design, KESRL-ML-93-002.
20. Ge, Ping, Lu, Stephen C.-Y. and Bukkapatnam, Satish
TS, 2000, “An Ontological Extension of the Axiomatic
Design Approach for Parametric Design of Mechanical Systems”,
Technical Report of USC IMPACT Laboratory, IMPACT-WP2000-015,
November, Los Angeles, California, December 1995.
21. Ge, Ping, and S. C-Y. Lu, 1999, “AIMS Technology
Application Manual”, Technical Report of USC IMPACT
Laboratory, IMPACT-WP99-005, July, Los Angeles, California,
December 1996.
22. Ge, Ping S. C-Y. Lu, and Wang, Nanxin, “A Machine
Learning Approach to Bumper System Design and Analysis”,
Technical Report of Ford Scientific Research Laboratories,
AJ443-TR97-007, Ford Motor Company, Dearborn, Michigan,
USA, August 1997.
23. Lu, S. C-Y., and Cai, J., “Conflict Management
in Collaborative Engineering Design - I”, Technical
Report of USC IMPACT Laboratory, Los Angeles, California,
USA, December 1997.
24. Lu, S. C-Y., and Cai, J., “Conflict Management
in Collaborative Engineering Design - II”, Technical
Report of USC IMPACT Laboratory, Los Angeles, California,
USA, December 1998.
25. Ge, Ping S. C-Y. Lu, and Wang, Nanxin, “Study
of Meta Modeling Techniques and Their Applications in Engineering
Design”, Technical Report of Ford Scientific Research
Laboratories, AJ443-TR98-010, Ford Motor Company, Dearborn,
Michigan, USA, August 1998.
26. Ge, Ping, and S. C-Y. Lu, “Adaptive and Interactive
Modeling System: A User’s Manual”, Technical
Report of Ford Scientific Research Laboratories, AJ443-TR99-001,
Ford Motor Company, Dearborn, Michigan, USA, November 1999.
27. Ge, Ping, and S. C-Y. Lu, “AIMS Technology Application
Manual”, Technical Report of USC IMPACT Laboratory,
IMPACT-WP99-005, Los Angeles, California, USA, July 1999.
28. Lu, S. C-Y., and Cai, J., “Conflict Management
in Collaborative Engineering Design - III”, Technical
Report of USC IMPACT Laboratory, Los Angeles, California,
USA, December 1999.
29. Lu, S. C-Y., Udwadia, F., Burkett, W., Cai, J., “Conflict
Management in Collaborative Engineering Design”,
Technical Report of USC IMPACT Laboratory, Los Angeles,
California, USA, May, 2000.
30. Lu, S. C-Y., and Cai, J., “A Generic Collaborative
Engineering Design Process Model for Conflict Management”,
Technical Report of USC IMPACT Laboratory, Los Angeles,
California, USA, June 2000.
31. Ge, Ping, Lu, Stephen C.-Y. and Bukkapatnam, Satish, “An
Ontological Extension of the Axiomatic Design Approach
for Parametric Design of Mechanical Systems”, Technical
Report of USC IMPACT Laboratory, IMPACT-WP2000-015, Los
Angeles, California, USA, November 2000.
32. Lu, S. C-Y., and Cai, J., “Support Design Knowledge
Integration Over Internet”, Technical Report of USC
IMPACT Laboratory, Los Angeles, California, USA, December
2000.
33. Lu, S. C-Y., Udwadia, F., Burkett, W., Cai, J., “Conflict
Management in Collaborative Engineering Design”,
Technical Report of USC IMPACT Laboratory, Los Angeles,
California, USA, May, 2000.
34. Lu, S. C-Y., and Cai, J., “Conflict Management
in Collaborative Engineering Design - IV”, Technical
Report of USC IMPACT Laboratory, Los Angeles, California,
USA, December 2000.
35. Udwadia, F., Lu, S. C-Y., Cai, J., Jing N., “Conflict
Management in Collaborative Engineering Design - V”,
Technical Report of USC IMPACT Laboratory, Los Angeles,
California, USA, December 2001.
36. Udwadia, F., Lu, S. C-Y., Cai, J., Jing N., “Socio-Technical
Theory to Support Collaborative Engineering Process”,
Technical Report of USC IMPACT Laboratory, Los Angeles,
California, USA, December 2001.
37. Lu, S. C-Y., Udwadia, F., Jing N., Zhang J. Y., “A
Socio-Technical Framework to Support Collaborative Engineering
Processes”, Final Report , Los Angeles, CA, USA,
December, 2002.
|
|
